Product List (Class Ⅰ & Class Ⅱ)

Type B capacitors have a border around the top and bottom electrodes which helps to prevent epoxy creep-up related shorts and may aid in optical recognition with automated equipment. The bottom electrode is not suitable for solder die attach as the solder barrier layer has been removed. These capacitors can be used upside-down so top/bottom orientation is not important.  
 

Contact Us for Help

We get it. It’s tough to find the perfect capacitor with all the possible size, thickness, electrode, dielectric and capacitance options from among our thousands of part numbers. Our Product Search Engine is a great place to start, but for an immediate response just give us a call at 408-748-0100 (USA) or contact us electronically using our contact form, tell us your requirements and we will find you the perfect part for you.  

Low εr Capacitor Part Numbers

 

Metal Stack

Depending on the ceramic dielectric used and electrode configuration, we use different metal stacks to achieve best mechanical and electrical performances. The different stacks we may use are as follows.
Top
TiW – Au, TaN – TiW – Au
Bottom

TiW – Au, TaN – TiW – Au

 

Selection Guide | Active Part Number Spectrum

Table cells can be clicked to reveal applicable part numbers and a link to the spec sheet for details. The different colors represent the different dielectric material used as below.  
 

Related Sites

Case Study (SLCs Contributing to 5G Deployment)

Search Ceramic Products

Here our ceramic products can be searched to find a part number that satisfies your desired specifications. Select the desired product from the tabls below and parametrically search for your specifications.
Spec sheets can be downloaded from the search results.

Single Layer Chip Capacitors


* indicates a required field.



*Ranges can be dragged and selected.





Row/Array Capacitors

Hi-K capacitors available in a 2,3 or 4 pad arrays. Sharing common backside metalization, this configuration provides space and cost savings.




Thin Film Chip Resistors

Wirebondable single layer thin film resistors suitable for both AuSn and epoxy die attachment. Available in sizes from 16 x 16 mils with power handling up to 100mW.




Part Number Spec Capacitance (pF) Cap. Tol. Size (mil/mm) Size Tol. (mil/mm) Thickness (mil/mm) Thickness Tol. (mil/mm) Rated Voltage Type Temp. Coeff.

    Please fill in the required information and send.

    No products found matching the selected criteria. Please change the conditions and search again. If you would like to customize, please contact us using the form below.

    Content of inquiry

    Samplespec sheet

    Customer Information
    *All fields are required

    captcha

    Contact

    +1-408-748-0100
    Office Hours: 8:30am - 5:30pm PST

    Contact
    ...