Ejector needles (ejector pins) are used to push up on semi-conductor die from below to assist with pick-up. Customizing to add a diamond tip or other modifications to suit each particular application is possible.
φ0.7 ・ θ15°・ 15μR |
φ0.7 ・ θ10°・ 150μR |
φ0.7 ・ θ15°・ 250μR |
We allow you to specify customized materials, diameters (φD), angles (θ), lengths (L), tip radius, and shape (Detail Z).
| Material Diameter | Tungsten Carbide ・ HSS ・ Palladium Alloy |
| Diameter | φ0.4 ・φ0.5 ・φ0.64 ・φ0.7 ・φ1.0 |
| Angle | 8°・ 10°・ 15°・ 20°・ 25°・ 30° |
Carbide (Minimum Lot 20pcs)
| Part Number | Diameter (Ф) | Tip Angle (°) | Length (L) | Tip Radius R(μR) |
| STD040A100L089R030CA098 | 0.4 | 10 | 8.9 | 30 |
| STD070A100L250R025CA016 | 0.7 | 10 | 25 | 25 |
| STD070A150L250R025CA017 | 0.7 | 15 | 25 | 25 |
| STD070A150L250R050CA018 | 0.7 | 15 | 25 | 50 |
| STD070A200L250R075CA019 | 0.7 | 20 | 25 | 75 |
| STD070A200L250R100CA031 | 0.7 | 20 | 25 | 100 |
HSS(Minimum Lot 20pcs)
| Part Number | Diameter (Ф) | Tip Angle (°) | Length (L) | Tip Radius R(μR) |
| STD064A100L150R020HA002 | 0.64 | 10 | 15 | 20 |
Palladium Alloy (Minimum Lot 20pcs)
| Part Number | Diameter (Ф) | Tip Angle (°) | Length (L) | Tip Radius R(μR) |
| STD070A100L215R020TA090 | 0.7 | 10 | 21.5 | 20-25 |
| STD070A100L250R020TA099 | 0.7 | 10 | 25 | 20 |
+1-408-748-0100
Office Hours: 8:30am - 5:30pm PST
