Precision Products
Dispensing NozzlesSpecial Application Nozzles
Special Application Nozzles
Multi-Shot Range Nozzle
Reduces takt time incorporating two shots onto one.
Multi-Shot Range Nozzle
Enables “drawing dispensing” with a cross pattern shape. This nozzle can also reduce takt time by incorporating four shots into one.
Nozzle for Low Viscosity / Low Pressure Dispensing
Allows the dispensing of low viscosity materials with minimal dripping. The surface resistance of the nozzle interior allows excellent accuracy while dispensing materials under very low pressure (<0.1MPa).
Nozzle for Dense Component Environments
Used for hard to reach areas. Without altering the inner diameter, tip thickness is reduced from 50um to 25um allowing dispensing in extremely narrow areas between board components.
Stamp Method Nozzle
In traditional pin transfer method there is a need to repeatedly dip the pins into a reservoir for reapplication of material. This nozzle has eliminated repeated dipping, allowing a syringe to feed the material vertically into the nozzle improving takt time.
High Fluidity Material Dispensing Nozzle
Pipes are attached to the nozzle fixture by press and crimp methods vs. using adhesives. This prevents unwanted detachment and leakage.