Precision Products

Dispensing Nozzles

Special Application Nozzles

Special Application Nozzles

Specialized nozzles to meet you unique needs.

Elliptic Tip Nozzle(For SMD)

ps_pp_dn_san_contens_01

Multi-Shot Range Nozzle

Reduces takt time incorporating two shots onto one.

  • ps_pp_dn_san_contents_02
    Tip opening
  • ps_pp_dn_san_contents_03
    View of multiple shots

Slit Nozzle (For SMD)

ps_pp_dn_san_contents_04

Multi-Shot Range Nozzle

Enables “drawing dispensing” with a cross pattern shape. This nozzle can also reduce takt time by incorporating four shots into one.

  • ps_pp_dn_san_contents_05
    Tip
  • ps_pp_dn_san_contents_06
    Tip opening
  • ps_pp_dn_san_contents_07
    View of multiple shots

Long Nozzle (For LED(Phosphor), CMOS)

ps_pp_dn_san_contents_08

Nozzle for Low Viscosity / Low Pressure Dispensing

Allows the dispensing of low viscosity materials with minimal dripping. The surface resistance of the nozzle interior allows excellent accuracy while dispensing materials under very low pressure (<0.1MPa).

  • ps_pp_dn_san_contents_09
    Tip
  • ps_pp_dn_san_contents_10
    Tip opening

Fine Nozzle (For Crystal Oscillators)

ps_pp_dn_san_contents_11

Nozzle for Dense Component Environments

Used for hard to reach areas. Without altering the inner diameter, tip thickness is reduced from 50um to 25um allowing dispensing in extremely narrow areas between board components.

  • ps_pp_dn_san_contents_12
    Tip opening

Stamping Nozzle

ps_pp_dn_san_contents_13_updated

Stamp Method Nozzle

In traditional pin transfer method there is a need to repeatedly dip the pins into a reservoir for reapplication of material. This nozzle has eliminated repeated dipping, allowing a syringe to feed the material vertically into the nozzle improving takt time.

  • ps_pp_dn_san_contents_14
    Tip opening

Solid Piece Nozzle (All-Purpose)

ps_pp_dnobop_nc_contents_15_updated

High Fluidity Material Dispensing Nozzle

Pipes are attached to the nozzle fixture by press and crimp methods vs. using adhesives. This prevents unwanted detachment and leakage.

  • ps_pp_dn_san_contents_16
    Nozzles
  • ps_pp_dn_san_contents_17
    Nozzle bore
  • ps_pp_dn_san_contents_18
    Nozzle bore

SBR Nozzles

ps_pp_dn_san_contents_19
  • ps_pp_dn_san_contents_20_updated
    Dimensions
  • ps_pp_dn_san_contents_21_updated
    Dimensions

KNC Nozzles

ps_pp_dn_san_contents_22
  • ps_pp_dn_san_contents_23_updated
    Dimensions
  • ps_pp_dn_san_contents_24_updated
    Dimensions

ULB Nozzles

ps_pp_dn_san_contents_25
  • ps_pp_dn_san_contents_26_updated
    Dimensions
  • ps_pp_dn_san_contents_27_updated
    Dimensions

NCA Nozzles

ps_pp_dn_san_contents_28
  • ps_pp_dn_san_contents_29_updated
    Dimensions
  • ps_pp_dn_san_contents_30_updated
    Dimensions

MC Nozzles

ps_pp_dn_san_contents_31
  • ps_pp_dn_san_contents_32_updated
    Dimensions
  • ps_pp_dn_san_contents_33_updated
    Dimensions
button_download_catalog
Back to top