Ceramic Products

Single Layer Chip Capacitors

Standard Single Layer Chip Capacitors

Standard Single Layer Chip Capacitors

Features

  • High reliability established over 30 years of proven success.
  • An extensive product line-up of Class 1 (NPO & temperature compensating) and Classes 2 & 3 (higher K values, but less stable TC) capacitors available.
  • Select from three design types (A, B, and C) to best fit installation conditions and required specifications.

Contact Us for Help

We get it. It’s tough to find the perfect capacitor with all the possible size, thickness, electrode, dielectric and capacitance options from among our thousands of part numbers. Our Product Search Engine is a great place to start, but for an immediate response just give us a call at 408-748-0100 (USA) or contact us electronically using our contact form, tell us your requirements and we will find you the perfect part for you.

Key to Part Numbers

ps_cs_slcc_contents_01
(1)Design Styles
A:Type A
B:Type B
C:Type C
(2)Metallization Scheme
M:MIC (Thin Film Metallization)
– Border/Array : TiW/Au or TaN/TiW/Au
– Non-border : TiW/Pt/Au or TaN/TiW/Pt/Au
(3)Capacitor Electrode Design
S:Single Value Design
G:Gap Design
B:Binary Array
M:Multi-pad Array
(4)Nominal Capacitance Code (EIA standard)
Code  Capacitance
1R0    1.0 pF
100    10 pF
101    100 pF
102    1000 pF
(5)Capacitance Tolerance Code
Code  Capacitance
 A    +/- 0.05 pF
 B    +/- 0.10 pF
 C    +/- 0.25 pF
 J    +/- 5%
 K    +/- 10%
 M    +/- 20%
 V    -0/ +100%
 Z    -20%/ +80%
 S    Special
(6)EIA Dielectric Classes
See Dielectric Specifications
(7)Physical Configurations
See Dielectric Specifications
(8)Custom Dimensional Tolerance
X:Custom thickness tolerance
Y:Custom outer dimension tolerance
(9)Dielectric Material Code
See Dielectric Specifications
(10)Capacitance Measurement Frequency
K:@1kHz
M:@1MHz
(11)Requirements
Screening, packaging, and other customized non-design requirements

* (8)(9), and (10) only shown on custom specifications.

(11) can be added to any part number without changing the design specification. Multiple suffixes can be used for a part number.

Physical Configurations

Single Value Series

Type A (Top Face) and B (Top & Bottom)

ps_cs_slcc_contents_02

Type C (Top & Bottom)

ps_cs_slcc_contents_03

Multi-Value Series

Gap Capacitors

ps_cs_slcc_contents_04

Binary Capacitors

ps_cs_slcc_contents_05

Integrated Resistor+Capacitor Chips

ps_cs_slcc_contents_06

Typical Multi-Pad Row Capacitors

ps_cs_slcc_contents_07

Product List

Type A

High Q (Class I) Single Value Capacitor
Select by capacitance, dielectric, and chip dimensions

**These part numbers require suffix “-4M” when ordering/ (ex. AMS0R8A1H-4M)

ps_cs_slcc_contents_09

High K (Class II) Single Value Capacitor
Select by capacitance, dielectric, and chip dimensions

* Please add suffix-FK for part numbers.

Binary Capacitors

Gap Capacitors

*1 These capacitance values are provided for reference. Pass/fail judgments are based on the measured capacitance at the largest electrode.
*2 Refer to the High Q Dielectric Color Index.

Type B

High Q (Class I) Single Value Capacitor
Select by capacitance, dielectric, and chip dimensions

*These part numbers require suffix “-4M” when ordering/ (ex. AMS0R8A1H-4M)

ps_cs_slcc_contents_14

High K (Class II) Single electrode capacitor
Select by capacitance, dielectric, and chip dimensions

* Please add suffix-FK for part numbers.

Binary Capacitors

Gap Capacitors

*1 These capacitance values are provided for reference. Pass/fail judgments are based on the measured capacity at the largest electrode.
*2 Refer to the High Q Dielectric Color Index.

Type C

High Q (Class I) Single electrode capacitor
Select by capacitance, dielectric, and chip dimensions

*These part numbers require suffix “-4M” when ordering/ (ex. AMS0R8A1H-4M)

ps_cs_slcc_contents_19

High K (Class II) Single electrode capacitor
Select by capacitance, dielectric, and chip dimensions

*Please add suffix-FK for part numbers.
*2 The above represents our product lineup as of November 2010, which is subject to change without notice.
*3 Class III is limited to custom products.

button_download_catalog
button_search_product
Back to top